Isenberg - 100.4201BN - 3/4'' Thermostatic Valve With Trim
Questions about Isenberg - 100.4201BN
The plumbing professionals at Kitchen & Bath Design Center are available to assist you with your selection of Isenberg products.
Isenberg - 100.4201BN
The 100.4201- .75'' Thermostatic valve is a NPT female connection valve with two inlets with integral stop kits and single output. The valve has a flow rate of 13.0 GPM at 60 PSI. Supply Stops - There are two safety stops at each water inlet to prevent water flow in case of installation and repairs. Handle Operation - The handle is used to control temperature of water flowing through the outlet. This handle does not control the volume of water flowing through the valve. As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the surface of finished tile which should be between 2.77'' and 3.44''. Also, the valve must be installed vertical and not at an angle. In case, a tile is thicker or wall is deep, extensions are used for elongating both handles of the valve to ensure proper setting of the trim (length of extensions for TVH.4201 valve is 1.40''). Extension kits comprises of thermostatic handle extension, which can be ordered separately in chrome, brushed nickel or other special finishes. Cut Out Dimensions - The cut out in wall should be 4.44'' X 4.44'' which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall. Trims - The trims comprise of well finished trim plate and handle. The trim plate is used to cover the wall and has markings for HOT/COLD for temperature control handle. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the handle knob which has a push button on the side. To adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required during installation) for it to function properly. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.
ADDITIONAL PRODUCT INFORMATION:
- Solid Brass Valve & Trim
- Includes Thermostatic Valve
- 3/4'' NPT Female Connections
- Extensions Available - TVH.E185**
100.4201BN - Isenberg
Kitchen & Bath Design Center is proud to present this brushed nickel pvd finished shower faucet trim, by Isenberg. The 100.4201BN is made from premium materials, this Shower Faucet Trim offers great function and value for your home. This fixture is part of Isenberg's decorative Serie 100 Collection, so make sure to check out other contemporary,modern fixtures to accessorize your room.
Isenberg Bath Corporation / Isenberg faucets offers a full and extensive range of plumbing fixtures certified for sale in the United States & Canada. It’s North American distribution center is in Irving TX. All items are shipped from that location. Isenberg plumbing fixtures and faucets generally come in a modern / contemporary style. Isenberg offers complete ranges of products for the bathroom including single hole faucets, 8” widespread faucets, and extensive range of thermostatic shower valves, hand showers, brass showerheads and more. All products within a collection / series are matching for the enthusiast who has an eye for designing a perfectly coordinated bathroom. Isenberg products are made in ISO certified and IAPMO audited foundry’s and are independently tested and certified by IAPMO and carry the UPC logo. Isenberg products and components are made in several countries including Germany, Italy, China and Hungary. Plumbing fixtures and valves are expected to last a lifetime. That is why Isenberg has instituted a deep and rigorous forging, casting and assembly process for all Isenberg products. Isenberg employs a distinct design / sourcing, manufacturing and assembly process. Products are conceptualized and designed collectively in the United States, Europe and Asia to ensure that we are able to offer quality product with a world-class standard with input from experts at various Isenberg locations. Isenberg uses best-in-class cartridges from well known cartridge manufacturers including Fluhs, Kerox and Sedal. All cartridges are off the shelf designs and can be provided on demand. Isenberg is also a Watersense Partner and committed to technology that conserves water usage. Isenberg's faucets and showerheads consistently use 20-30% less water than industry requirements.Isenberg offers a limited lifetime warranty on its products within the United States and its full warranty policy can be viewed on its website www.isenbergfaucets.com.